MF DIGITAL OptiEC Pro 6 Specifications download pdf (Page 56)

ProgRes

MAC CapturePro 2.7, Release 001

Operational windows - Measurement

If a calibration has been edited, the existing data will be overwritten.

Click “Cancel” to reset the changes made in the window.

The name of the calibration will appear in the area “Calibrations” in the

window. The selected calibration will now be used for referencing the

length of the measurement shapes in the image. The desired calibra-

tion can be selected by a click onto the name of the calibration in the

respective area of the measurement window.

7.4.2 Insert a new unit or edit a unit

In the window “Units”, the available units are displayed. When a new

unit is selected, the reference of the distances for the shapes in the

image is updated immediately.

The following units are set by default: µm, mm, cm, m, inch and mil.

If further units are desired, for example country-specific measurement

units, they can be added with a click on . A window opens where

the name of the unit and the length of the unit can be inserted in mm.

Click “OK” to apply the settings.

Fig. 7 / 22: Insert new unit

With a click on , a selected unit can be removed. When the unit is

selected and “Edit” is clicked, the unit can be edited.

C Note: Only the units that have been individually defined by

the user can be edited or removed. The units which have

been set by default cannot be changed by the user.

When a scale is inserted into the image, the length of the scale will be

shown in the box in the area “Scale” using the selected unit. If several

scales have been inserted into the image, a particular scale can be

selected.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 89 90

No comments

MF DIGITAL OptiEC Pro 6 Specifications Page 56