MF DIGITAL OptiEC Pro 6 Installation Guide download pdf (Page 4)

444

Page 4

Scribe EC Quick Installation Guide

with Prism PLUS Printer

Document Revision: 2004/12/07

ScribeEC with OptiEC PRO printer

Installation Guide

Document Revision: 2005/05/20

MF DIGITAL

121 Carolyn Blvd.

Farmingdale, NY 11735

001 631 249 9393

www.mfdigital.com

IF YOU PURCHASED A PRINT STATION – SKIP THIS PAGE

Mounting the Firewire Adapter Card

DVD dive ScribeEC requires only one PCI

firewire B controller card (IEEE-1394B).

For additional information on making the

firewire connection refer to Appendix A.

1. Shut down the PC.

2. Turn the PC’s power off.

3. Unplug the PC.

4. Remove the PC’s cover as

indicated in the PC’s manual.

5. Locate an empty PCI slot, as

seen in (fig.1).

6. Install the firewire adapter card (fig. 2).

Installing the Drive Bay

(fig. 2)

The internal configuration of your computer may be different from the computer picture below

Note:

1. Place the drive bay onto the base unit as seen in

(fig. 1).

2. Position the drive bay so that the front right

corner sits over the dotted line (fig. 2). Proper

position is shown in (fig. 3).

(fig.1)

(fig.

(fig. 3)

(fig. 1)

1 2 3 4 5 6 7 8 9 ... 18 19

No comments

MF DIGITAL OptiEC Pro 6 Installation Guide Page 4