MF DIGITAL 5500 Series Specifications download pdf (Page 7)

CD-3706/P Operator’s Guide

Document Revision: 030501.1

5500 Series Operator’s Guide

Document Revision:05/07/07

Page 6

Getting Started

Carefully remove the 5500 Series duplicator from the shipping container. Inspect

the contents, and verify them against the packing slip. Report any errors in

shipping as soon as possible.

What’s In The Box

Your new 5500 Series duplicator includes:

• 5500 Series duplicator

• Power cord

• Firmware CD

• Manual CD

• LAN cable for network hook-up

•

Windows XP CD

Packing Materials

Please retain the original box and packaging in the event that the unit requires

future servicing. This will help to reduce the possibility of damage occurring in

transit.

The Best Place To Put The 5500

The best operating location for the 5500 Series duplicator is in a climate-

controlled area, free of dirt, dust, humidity, excessive heat, and electronic or

electromagnetic interference. Room temperature should be between 65 and 75

degrees Fahrenheit, or between 18 and 23 degrees Celsius. Place the 5500 on a

solid, steady work surface, and allow sufficient room for all incidental work

materials. Provide at least six inches of clearance on all sides of the unit for

ventilation.

Safety Precautions

The system is shipped with a three-prong power connector, and must be used with

a properly grounded AC receptacle. DO NOT try to defeat the third “ground”

prong. All computer peripherals must be properly grounded, and the 5500 is no

exception. The use of a power conditioner, such as an Uninterruptible Power

Supply (UPS) or a surge protector, is highly recommended. The minimum

required size is 500VA.

Repairs or alterations should only be attempted by an authorized, factory-trained

technician. MF DIGITAL reserves the right to void the warranty if unauthorized

service is performed.

1 2 3 4 5 6 7 8 9 10 11 12 ... 54 55

No comments

MF DIGITAL 5500 Series Specifications Page 7