MF DIGITAL 5500 Series Specifications download pdf (Page 53)

CD-3706/P Operator’s Guide

Document Revision: 030501.1

5500 Series Operator’s Guide

Document Revision:05/07/07

Page 52

• Click on the BROWSE IMAGE button and select an image file to use (.ISC, .ISO,

or .IMG). Likely this will be the .ISC file made in the previous step.

• Leave LABEL blank as the 5500 does not support in-line direct to disc printing so

you need not enter anything here. Consider the MF Digital 3000 Series for

automating duplication and printing if desired.

• Select the desired job options:

COPY:

If you would like to write the disc, check this option. Typically this

will always be checked

VERIFY:

If you would like to verify the disc, select this option. This will

perform a bit-for-bit verify of the disc. Selecting COPY and TEST

at the same time will perform a VERIFY on the disc once written

PRINT:

Not applicable here, but on systems supporting direct-to-disc in-line

print, this option could be selected to enable printing

• Next choose which systems you wish to allocate to the job. If not networked, or if

this is the only MF Digital stand-alone system on your network, only

LOCALHOST will appear. If you have other unit but they do not appear, go to the

LOCALHOST TAB, click on connect to add other stand-alones. Once connected,

you may start up jobs on multiple systems simultaneously. To add systems, simply

left click on the desired system to use and then click on the ADD MACHINE.

Optionally you may add all available systems by clicking on ADD ALL. The

REMOVE buttons can be used to unallocated that system from the job you are

about to launch.

• Once you have filled in the appropriate fields and you are happy with your

selections, click on the OK button and your job will start: If it does not, be sure

you have 1 GB of free space on the hard disc

1 2 ... 48 49 50 51 52 53 54 55

No comments

MF DIGITAL 5500 Series Specifications Page 53